Mains boost pumps are fitted directly to the incoming mains and
consequently deliver potable water. It is therefore essential that
the pump be WRAS approved and comply with UK water regulations. The
new 'flo~mate' pump from Stuart Turner is the only
WRAS approved mains boost pump available on the market, giving
consumers the confidence that not only does
'flo~mate' offer tried and tested engineering from
Stuart Turner but has the full backing of WRAS approval.
'flo~mate' pumps offer a
simple solution to boost incoming mains water pressure without the
need for a cold water break tank. Where there is low mains water
pressure Flo~mate will deliver a minimum 1.5 bar pressure at a
maximum flow rate of 12 litres per minute, meeting the requirements
of most unvented boilers and in accordance with the UK water
regulations.
'flo~mate' also features a built in bypass,
which means that when the mains pressure exceeds 1.5 bar, the
performance is not restricted and will enter the system. The pump
starts automatically when a flow rate of 0.6 litre per minute or
more exists ensuring performance on demand. For
further Mains Boost Pump information click here.
'flo~mate' comes with a 2 year guarantee, when
you register your pump on-line and as always is supported by Stuart
Turners excellent customer service team, Pump Assist, a dedicated
and friendly team of highly experienced technical experts, on hand
to help with any question you might have.
Stuart Turner pumps, supplied with the innovation, quality and
reliability you expect.