NEW! Flo~mate Mains Boost Pump

Introducing Flo~mate, the new mains boost pump from Stuart Turner

'Flo~mate' pumps offer a simple solution to boost incoming mains water pressure without the need for a cold water break tank.  At times when mains water pressure is insufficient, Flo~mate will deliver a minimum 1.5 bar pressure at a maximum flow rate of 12 litres per minute, meeting the requirements of most unvented boilers

Flo~mate also features a built in bypass, which means that when the mains pressure exceeds 1.5 bar, the performance is not restricted and will enter the system. The pump starts automatically when a flow rate of 1 litre per minute or more exists and has been designed in accordance with the UK water regulations. 

Stuart Turner will be showcasing Flo~mate at this years PHEX events due to be held at Old Trafford in Manchester in October 2012 and again at Stamford Bridge, Chelsea in November 2012. However if you are unable to attend one of the PHEX events and want to find out more about this exciting new solution to poor mains water pressure then visit their website where there is a wealth of information available to view or download including technical data sheets. 

'Flo~mate comes with a 2 year guarantee, when you register your pump on-line and as always is supported by their excellent customer service team, Pump Assist, a dedicated and friendly team of highly trained and experienced technical experts, on hand to help with any question you might have. 

Stuart Turner pumps, supplied with the innovation, quality and reliability you expect.

Written by Stuart Turner at 09:00



Comments closed