WRAS Approved! Flomate iBoost is the solution to low mains water pressure

Stuart Turner designed and developed Flomate iBoost to boost the mains water supply to larger properties with multiple bathrooms using high flow combination boilers or an unvented cylinder system, where higher pressure and flow are required.

The fully integrated Flomate iBoost combines an impressive 200 litre cold water break tank which overcomes restricted mains water flow with a high performance multi-stage pump to dramatically boost pressure making it capable of delivering water up to 4.5 bar and flow rates in excess of 100 litres per minute, with a typical performance of 60 litres a minute at a very respectable 3.0 bar pressure. The results are better shower performance, higher flow rates from taps and in fact, multiple water using appliances throughout the property at any given time.

The system is simple to install, with an ingenious access aperture designed within this engineered appliance and yet is compact enough to sit within any standard 600mm kitchen larder cupboard. Equally, with its 'white goods' look it won't look out of place alongside other appliances within a kitchen or utility room.

Flomate iBoost offers tried and tested engineering from Stuart Turner, has the full backing of WRAS approval and UK water authorities and is available nationwide from your local merchant.

Find out more about this ultimate solution to low mains water pressure within a property.

WRAS approved Flomate iBoost

 

Written by Stuart Turner at 15:00

0 Comments :

Comment

Comments closed

Tags

Archive