Aquaboost iBoost V200-100-45 CAT 5 - Integrated mains water boosting system


The Aquaboost iBoost V200-100-45 CAT 5 water pressure and flow boosting system features a weir overflow making it suitable for use in applications where the risk of backflow contamination from Category
5 fluids exists.


  • Boosting water pressure and flow in laboratories, stables, kennels, waste bin stores and wash down stations

Technical Specification

Product code 46713
Guarantee 3 years
Pump control system Variable speed, pressure transducer
Control interface Programmable controls**
Dry run protection  
Noise 57 dB(A)
Fluid risk compatibility CAT 5
Air gap Type AB
Pressure vessel 8 litres
Maximum head (closed valve) 4.5 bar (450 kPa)
Maximum flow rate 100 l/min
Maximum inlet pressure (tank fill valve) 7 bar (700 kPa)
Maximum static outlet head 15 metres
Ambient air temperature (Min - Max) 4 °C - 30 °C
Water tank
Nominal size 220 litres
Usable capacity 200 litres
Fill rate 20 l/min*
Cold water inlet G ½ male
Cold water outlet (pump) G ¾ male
Cold water outlet (flexible hose) G ¾ female x 22 mm push-in
(220 mm long)
Overflow (compression fitting) G ¾
Break tank Polyethylene
Front panel Acrylic capped ABS
Pump body Brass / stainless steel
Pump impeller Stainless steel
Pump type Multistage centrifugal
Duty rating Continuous (S1)
Pump motor type 3 phase induction (current overload sensor)
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 6.8 Amps
Power consumption 996 Watts
Fuse rating 10 Amps
Power cable (pre-wired) 3.0 metres
Depth 529 mm
Width 536 mm
Height 1504 mm
Empty weight 56 Kg
Filled weight 256 Kg

*Assumes 1 bar inlet pressure.

**Variable speed pre-set to 3.0 bar, adjustable in 0.1 increments.

Product Variants
Part no Description
46677 Aquaboost iBoost F200-100-45 CAT 5
46713 Aquaboost iBoost V200-100-45 CAT 5
46714 Aquaboost iBoost +200 CAT 5
46692 ABF F50-80-35 CAT 5
46693 ABF F100-80-35 CAT 5