Aquaboost ABP F120-30 - Centrifugal pump pressure set

Pressure Set

The Aquaboost ABP F120 pressure sets are designed to meet system demands in larger domestic and light commercial applications.

The ABP F120 pump is mounted onto a WRAS approved 24 litre diaphragm tank providing a buffer of pressurised stored water.  Ideally suited to boost stored cold water supplies from a storage tank to un-vented hot water cylinders/combination boilers.

Application

  • In the home Aquaboost ABP F120 Pressure Sets are typically used to boost cold water supplies to Combination Boiler or Pressurised Un-vented stored hot water systems
  • In light commercial applications they can be used to boost cold water supplies to laundries, kitchens, hotels & sports/leisure facilities

Technical Specification

General
Product code 46601
Guarantee 2 years
WRAS approval Approved materials
Features
Pump type Centrifugal
Mechanical seal EPDM / Carbon / Ceramic
Anti-vibration feet  
Inlet strainer(s)  
Flexible hoses 2
Run on timer 3 sec
Dry run protection  
Diaphragm tank size 24 litres
Diaphragm tank water capacity 12 litres
Materials
Pump body Brass / Stainless steel
Impeller Stainless steel
Performance
Maximum head (closed valve) 2.6 bar
Performance @ 45 l/min 2.2 bar
Performance @ 90 l/min 1.3 bar
Maximum flow 127 l/min
Minimum static inlet pressure 1 metre
Maximum static inlet pressure 10 metres
Maximum static outlet pressure 13 metres
Maximum working pressure* 600 kPa (6 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 35 °C
Flow switch sensitivity (approx) 1.0 l/min
Pressure vessel air pre-charge 1.3 bar (19 psi)
Cut in flow 1 l/min
Cut in pressure 140 kPa (1.4 bar)
Connections
Pump connections G 1 male
Flexible hoses
Connections G 1 male x G 1 female x 300 mm long
Motor
Type Induction type, thermally protected
Duty rating Continuous (S1)
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 3.5 Amps
Power consumption 775 Watts
Fuse rating 13 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IPX5
Length 521 mm
Width 280 mm
Height (excluding hoses) 647 mm
Weight (including fittings) 17.3 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.


Product Variants
Part no Description
46601 ABP F120-30-1H-1
46602 ABP F120-40-1H-1
44622 ABP F120-50-1H-1
44624 ABP F120-60-1H-1
46617 ABP F55-45-1H-1
46618 ABP F80-45-1H-1