Aquaboost ABP F80-45 - Jet pump pressure set

Pressure Set

Ideal for the high pressure delivery of clean non-potable water from a water tank/cistern in either a positive or negative head application.

Jet Pressure Sets include a 24 litre diaphragm tank providing a buffer of 12 litres of pressurised stored water and are supplied with a power lead fitted with a 13 amp fused plug.

The range is suitable for general purpose use, pumping cold water.


Technical Specification

Product code 46618
Guarantee 1 year
Pump type Centrifugal
Mechanical seal EPDM / Carbon / Ceramic
Fully automatic control  
24 litre diaphragm tank  
Built in 'no water' cut out  
Positive and negative head application  
Quiet operation  
Maximum head (closed valve) 4.5 bar
Performance @ 10 l/min 3.6 bar
Performance @ 40 l/min 2.5 bar
Maximum flow 80 l/min
Minimum static inlet pressure 0.1 bar (1 metre)
Maximum static inlet pressure 0.5 bar (5 metres)
Maximum static outlet pressure 1.3 bar (13 metres)
Maximum working pressure* 500 kPa (5 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 35 °C
Maximum suction lift 5 metres
Cut out flow 1 l/min (approx)
Cut in pressure 180 kPa (1.8 bar)
Pressure vessel air pre-charge 2.0 bar (29 psi)
Pump connections G 1 female
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1)
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 5.2 Amps
Power consumption 925 Watts
Fuse rating 13 Amps
Power cable (pre-wired) 1.5 metres
Enclosure protection IPX4
Length 521 mm
Width 280 mm
Height (excluding hoses) 700 mm
Weight (including fittings) 15.7 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

Product Variants
Part no Description
46601 ABP F120-30-1H-1
46602 ABP F120-40-1H-1
44622 ABP F120-50-1H-1
44624 ABP F120-60-1H-1
46617 ABP F55-45-1H-1
46618 ABP F80-45-1H-1