Products

Aquaboost ABP F120-50 - Centrifugal pump pressure set

Previous Products

Now available as CH 4-50 PS

The Aquaboost ABP F120 pressure sets are designed to meet system demands in larger domestic and light commercial applications.

The multistage pump is mounted on to a WRAS approved 24 litre diaphragm tank providing a buffer of pressurised stored water.  Ideally suited to boost stored cold water supplies to un-vented hot water cylinders/combination boilers where there is low or no mains water supply.

Supplied with G1 flexible hoses and adaptors.

 

Technical Specification

General
Product code 44622
Guarantee 2 years
WRAS approval Approved materials
Features
Pump type Centrifugal
Mechanical seal EPDM / Carbon / Ceramic
Anti-vibration feet  
Inlet strainer(s)  
Flexible hoses 2
Run on timer 3 sec
Dry run protection  
Diaphragm tank size 24 litres
Diaphragm tank water capacity 12 litres
Materials
Pump body Brass / Stainless steel
Impeller Stainless steel
Performance
Maximum head (closed valve) 4.9 bar
Performance @ 45 l/min 4.6 bar
Performance @ 90 l/min 3.2 bar
Maximum flow 150 l/min
Minimum static inlet pressure 1 metre
Maximum static inlet pressure 10 metres
Maximum static outlet pressure 13 metres
Maximum working pressure* 900 kPa (9 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 35 °C
Flow switch sensitivity (approx) 1.0 l/min
Pressure vessel air pre-charge 2.8 bar (40.6 psi)
Cut in flow 1 l/min
Cut in pressure 290 kPa (2.9 bar)
Connections
Pump connections G 1 male
Flexible hoses
Connections G 1 male x G 1 female x 300 mm long
Motor
Type Induction type, thermally protected
Duty rating Continuous (S1)
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 7.3 Amps
Power consumption 1655 Watts
Fuse rating 13 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IPX5
Length 521 mm
Width 280 mm
Height (excluding hoses) 667 mm
Weight (including fittings) 23.4 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.


Product Variants
Part no Description
46601 ABP F120-30-1H-1
46602 ABP F120-40-1H-1
44622 ABP F120-50-1H-1
44624 ABP F120-60-1H-1
46617 ABP F55-45-1H-1
46618 ABP F80-45-1H-1