Flomate iBoost CAT 5 - Mains Water Pressure & Flow Boosting System

Previous Products

Now available as Aquaboost iBoost F200-CAT 5

The Flomate iBoost CAT 5 water pressure and flow boosting system features a weir overflow making it suitable for use in applications where the risk of backflow contamination from Category
5 fluids exists.


  • Boosting water pressure and flow in laboratories, stables, kennels, waste bin stores and wash down stations

Technical Specification

Product code 46677
Guarantee 3 years
Fluid risk compatibility CAT 5
Air gap Type AB
Pump type Centrifugal
Break tank water capacity (usable) 200 litres
Fill rate 20 l/min*
Pressure vessel 8 litres
Dry run protection  
Control interface Power on / Pump on / Dry run indicators
Pump reset button
Break tank Polyethylene
Pump body Brass / stainless steel
Impeller Stainless steel
Maximum head (closed valve) 4.5 bar (450 kPa)
Maximum flow 100 l/min
Maximum inlet pressure (tank fill valve) 7 bar (700 kPa)
Maximum static outlet head 15 metres
Min / Max ambient air temperature 4 °C - 30 °C
Inlet G ½ male
Outlet G ¾ male
Overflow G ¾ Compression fitting
(dia. 21.5 mm OD pipe)
Flexible hoses
Connections (outlet only) G ¾ female x 22 mm push-in
220 mm long
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1)
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 5.5 Amps
Power consumption 1260 Watts
Fuse rating 10 Amps
Power cable (pre-wired) 3.0 metres
Depth 529 mm
Width 536 mm
Height (excluding hoses) 1504 mm
Dry weight (including fittings) 55 Kg
Filled weight (maximum) 255 Kg

*Assumes 1 bar inlet pressure.