Techflo qt Standard 3.3 bar Single - Shower & whole house pumps

Previous Products

The Techflo qt Standard 3.3 bar Single pump has been phased out and superseded by the equivalent Monsoon pump (for a whole house).

For whole house applications, see Monsoon S4.5 bar Single



Techflo qt Standard Single pumps are designed to improve water supplies to single taps or to pump blended water from a shower mixer. Suitable for positive head applications only.

Standard pumps require a flow of 1.0 l/min through the outlet to start.


  • Boost the water pressure in either the hot or cold supply

Technical Specification

Product code 49079
Guarantee 3 years
WRAS approval 1406331
Pump type Centrifugal
Mechanical seal Nitrile / Carbon / Silicon Carbide
Anti vibration feet  
Inlet strainer(s)  
Flexible hoses 2
Dry run protection  
Maximum head (closed valve) 3.3 bar
Performance @ 9 l/min 2.5 bar
Performance @ 18 l/min 1.7 bar
Maximum flow 32 l/min
Maximum static inlet pressure 6 metres
Maximum working pressure* 460 kPa (4.6 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity (approx) 1.0 l/min
Pump connections 22 mm male
Flexible hoses
Connections 22 mm female x 22 mm push-in
200 mm long
isolating valves on inlet hose
Type Induction, auto-reset thermal trip
Duty rating Intermittent, 30 mins on, 30 mins off @ 20 l/min
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.8 Amps
Power consumption 410 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Enclosure protection IPX2
Length 345 mm
Width 134 mm
Height (excluding hoses) 220 mm
Weight (including fittings) 6.3 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.