Techflo tp Standard 2.0 bar Single - Shower pump

Previous Products

The Techflo tp Standard Single pumps are designed to improve water supplies to single taps or to pump blended water from a shower mixer. Suitable for positive head applications only.

Technical Specification

Product code 49086
Guarantee 1 year
WRAS approval 1506334 
Pump type Centrifugal
Mechanical seal Nitrile / Carbon / Silicon Carbide
Anti vibration feet  
Inlet strainer(s)  
Flexible hoses 2
Dry run protection  
Maximum head (closed valve) 2.0 bar
Performance @ 9 l/min 1.0 bar
Performance @ 18 l/min 0.1 bar
Maximum flow 17 l/min
Maximum static inlet pressure 10 metres
Maximum working pressure* 300 kPa (3 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity (approx) 0.8 l/min
Pump connections G ¾ male
Flexible hoses
Connections G ¾ female x 15 mm push-in
200 mm long
Type Series wound, auto-reset thermal trip
Duty rating Intermittent, (S3) 30 mins on/30 mins off @ 9 l/min
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.0 Amps
Power consumption 180 Watts
Fuse rating 3 Amps
Power cable (pre-wired) 1.5 metres
Enclosure protection IPX2
Length 228 mm
Width 97 mm
Height (excluding hoses) 152 mm
Weight (including fittings) 2.2 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.