Techflo tp Standard 2.0 bar Twin - Shower pump

Previous Products

The Techflo tp Standard Twin pumps are designed to boost the incoming hot and cold water supply to an individual shower, bath, shower mixer or mixer tap.  Suitable for positive head applications only.

Technical Specification

Product code 49085
Guarantee 1 year
WRAS approval 1506334
Pump type Centrifugal
Mechanical seal Nitrile / Carbon / Silicon Carbide
Anti vibration feet  
Inlet strainer(s)  
Flexible hoses 4
Dry run protection  
Maximum head (closed valve) 2.0 bar
Performance @ 9 l/min 1.5 bar
Performance @ 18 l/min 0.9 bar
Maximum flow 35 l/min
Maximum static inlet pressure 10 metres
Maximum working pressure* 300 kPa (3 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity (approx) 0.8 l/min
Pump connections G ¾ male
Flexible hoses
Connections G ¾ female x 15 mm push-in
200 mm long
Type Series wound, auto-reset thermal trip
Duty rating Intermittent, (S3) 30 mins on/30 mins off @ 9 l/min***
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.5 Amps
Power consumption 300 Watts
Fuse rating 3 Amps
Power cable (pre-wired) 1.5 metres
Enclosure protection IPX2
Length 250 mm
Width 97 mm
Height (excluding hoses) 152 mm
Weight (including fittings) 2.6 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

*** Both heads pumping 4.5 l/min.