Monsoon Extra Standard 3.0 bar Single
The Monsoon Extra Standard 3.0 bar
Single pump is designed for use in larger domestic and
light commercial applications. Installed into an open vented hot or
cold water system, where all outlets are below the level of the
cold water cistern, it has the equivalent effect of raising the
cold water cistern 23 metres above its current position with a flow
rate of 45 litres per minute.
Applications include boosting water pressures to individual
outlets where a high pressure boost is required. The
pump is not recommended for use in pairs for
boosting common hot and cold supplies to mixer taps and shower
valves (for applications such as this please refer to the Monsoon
Extra Universal range). Monsoon Extra is ideal as an outlet
pump installed after a shower valve pumping to multiple shower
heads.
Technical Specification
| The Pump |
| Inlet strainer |
|
| Stuart hard face mechanical seal |
|
| Flow switch sensitivity |
approx. 1.0 l/min |
| Max. inlet head |
10 metres |
| Plumbing connection |
22 mm push-in |
| Flexible hose |
2 off 22 mm push-in x
300 mm long
|
| Anti vibration feet |
|
| WRAS no. |
0304065 |
| The Motor |
| Power supply |
230/1/50 |
| Enclosure rating |
IPX4 |
| Motor induction type |
Induction type permanent capacitor thermally protected |
| Power consumption |
880 Watts |
| Full load |
3.9 Amps |
| Fuse rating |
13 Amps |
| Pre wired |
|
| Rating |
Continuous (S1) |
| Gross weight (packed) |
11.1 Kg |
| 2 Year Guarantee |
United Kingdom only |
| Part Number |
46281 (United Kingdom specification only) |