Monsoon Extra Standard 3.5 bar Single
The Monsoon Extra Standard 3.5 bar
Single pump is designed for use in larger domestic and
light commercial applications. Installed into an open vented hot or
cold water system, where all outlets are below the level of the
cold water cistern, it has the equivalent effect of raising the
cold water cistern 28 metres above its current position with a flow
rate of 45 litres per minute.
Applications include boosting water pressures to individual
outlets where a high pressure boost is required. The pump is not
recommended for use in pairs boosting common hot and cold supplies
to mixer taps and shower valves (for applications such as this
please refer to the Monsoon Extra Universal range). Monsoon
Extra is ideal as an outlet pump installed after a shower valve
pumping to multiple shower heads.
Technical Specification
| The Pump |
| Inlet strainer |
|
| Stuart hard face mechanical seal |
|
| Flow switch sensitivity |
approx. 1.0 l/min |
| Max. inlet head |
10 metres |
| Plumbing connection |
22 mm push-in |
| Flexible hose |
2 off 22 mm push-in x
300 mm long
|
| Anti vibration feet |
|
| WRAS no. |
0304065 |
| The Motor |
| Power supply |
230/1/50 |
| Enclosure rating |
IPX4 |
| Motor induction type |
Induction type permanent capacitor thermally protected |
| Power consumption |
1135 Watts |
| Full load |
5.2 Amps |
| Fuse rating |
13 Amps |
| Pre wired |
|
| Rating |
Continuous (S1) |
| Gross weight (packed) |
12.5 Kg |
| 2 Year Guarantee |
United Kingdom only |
| Part Number |
46283 (United Kingdom specification only) |