Products

Flomate Mains Boost Extra 80 - Low water pressure pump

Previous Products

Now available as MBF 80-1-15

Designed for higher occupancy properties with typically up to two bathrooms and to fit neatly within a standard 500 mm kitchen base unit.

Flomate Mains Boost Extra 80 can be connected directly to the incoming mains and will deliver up to 16 litres/minute flow at 3.0 bar pressure to multiple outles within the property, up to the preset cut-in limit of the 80 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges.

Application

  • Suitable for higher occupancy properties with typically up to two bathrooms, Flomate Mains Boost Extra 80 requires no on-site commissioning and fits neatly within a standard 500 mm kitchen base unit.

Technical Specification

General
Product code 46634
Guarantee 3 years
WRAS approval 1412061
Features
Pump type Peripheral
Mechanical seal EDPM / PTFE / Al. Oxide
Flexible hoses 2
Diaphragm tank size 80 litre
Diaphragm tank water capacity 40 litre
Dry run protection  
Materials
Pump body Brass
Impeller Brass
Performance
Maximum head (closed valve) 3.2 bar
Maximum flow 16 l/min
Maximum working pressure* 450 kPa (4.5 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 35 °C
Flow switch sensitivity (approx) 0.6 l/min
Connections
Pump connections G ¾ male
Flexible hoses
Connections G ¾ female x 15 mm push-in
200 mm long
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1)
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.7 Amps
Power consumption 365 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IPX4
Length 480 mm
Width 457 mm
Height (excluding hoses) 852 mm
Dry weight (including fittings) 21.8 Kg
Filled weight (maximum) 60.8 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.