Monsoon Extra Standard 3.0 bar Single
This product is no longer available. This page is for
reference only, please see Monsoon Extra U3.6 bar
Single.
The
Monsoon Extra Standard 3.0 bar Single
pump is designed for use in larger domestic and light commercial
applications. Installed into an open vented hot or cold water
system, where all outlets are below the level of the cold water
cistern, it has the equivalent effect of raising the cold water
cistern 23 metres above its current position with a flow rate of 45
litres per minute.
Applications include boosting water pressures to individual
outlets where a high pressure boost is required. The
pump is not recommended for use in pairs for
boosting common hot and cold supplies to mixer taps and shower
valves (for applications such as this please refer to the Monsoon
Extra Universal range). Monsoon Extra is ideal as an outlet
pump installed after a shower valve pumping to multiple shower
heads.
| Pump |
| Inlet strainer |
|
| Stuart hard face mechanical seal |
|
| Flow switch sensitivity |
approx. 1.0 l/min |
| Max. inlet head |
10 metres |
| Plumbing connection |
22 mm push-in |
| Flexible hose |
2 off 22 mm push-in x
300 mm long
|
| Anti vibration feet |
|
| WRAS no. |
0304065 |
| Motor |
| Power supply |
230/1/50 |
| Enclosure rating |
IPX4 |
| Motor induction type |
Induction type permanent capacitor thermally protected |
| Power consumption |
880 Watts |
| Full load |
3.9 Amps |
| Fuse rating |
13 Amps |
| Pre wired |
|
| Rating |
Continuous (S1) |
| Gross weight (packed) |
11.1 Kg |
| 2 Year Guarantee |
United Kingdom only |
| Part Number |
46281 (United Kingdom specification only) |