You are here   >   Home   >   Our Products   >   Showermate >   SHOWERMATE TP S2.0 bar Single
Showermate

SHOWERMATE TP S2.0 bar Single

Standard Single

SHOWERMATE TP Standard 2.0 bar Single Shower Pump. Designed to boost the hot or cold water supplies to single taps or pump blended water from a shower mixer.

Suitable for positive head applications only where the existing flow due to gravity is more than 2 litres/min.

 

Applications

  • Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
  • Suitable for use where there is already more than 2 litres/min flow from the outlet(s) to be boosted

1 Year Warranty WRAS Approved Product UKCA-CE
Showermate tp S2.0 bar Single
Key Features
  • 2.0 bar pressure
  • Suitable for positive head applications
  • High quality entry level plastic pump supplied with 15 mm flexible hoses
Resources & Downloads
Technical Specification
Product Code 49086
General
GTIN 5050400490869
Warranty 1 year
WRAS WRAS Approved Product (1506334)
Conformity Certification UKCA, CE
Features
Pump type Centrifugal
Pump control Flow Switch
Anti-vibration feet
Inlet strainer(s)
Flexible hoses 2
Dry run protection
Typical noise 56 dB(A)
Materials
Pump body Plastic
Impeller Plastic
Mechanical seal EPDM / Carbon / Al.Oxide
Performance
Maximum head - closed valve 2.0 bar / 20 metres
Performance @ 9 l/min 1.0 bar
Performance @ 18 l/min 0 bar
Maximum flow 17 l/min
Maximum static inlet pressure 10 metres
Maximum working pressure* 300 kPa / 3.0 bar
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity 0.8 l/min (approx)
Connections
Pump connections (Inlet) G ¾ M
Pump connections (Outlet) G ¾ M
Flexible hoses
Connections (Inlet) G ¾ female x 15 mm push-in x 185 mm long
Connections (Outlet) G ¾ female x 15 mm push-in x 175 mm long
Motor
Type Series wound, manual reset thermal trip
Duty rating Intermittent S3 (30 mins on / 30 mins off @ 9 l/min)
Electrical
Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 180 Watts
Current - full load 1 Amp
Fuse rating 3 Amps
Power cable length 1.5 metres (pre-wired)
Physical
Enclosure protection IPX2
Length 228 mm
Width 97 mm
Height - excluding hoses 152 mm
Weight - including fittings 2.2 Kg
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
Videos

User Login

Forgot your password? Login

To help us improve our website, please could you answer 2 quick questions:

Click here to stop this from appearing again.

How would you describe yourself?

What's your main reason for visiting our website?

Submit

Thank you!



Thank you for submitting your answers!