PH 75 ES CI (50 Hz) - Peripheral Pump

Cast Iron

The 0.75 HP PH 75 Cast Iron pump is designed for continuous operation at
5 litres/minute and above. This compact, high performance pump delivers flow rates up to 49 litres per minute and heads up to 72 metres.

Application

  • The PH 75 ES CI peripheral pump is designed to pump clean water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped. Please consult Stuart Turner Ltd for guidance.

Technical Specification

General
Product code 46732
Guarantee 1 year
Approvals CE
Features
Pump type Peripheral
Mechanical seal Nitrile / Carbon / Ceramic
Priming vent plug  
Noise 79 dB(A)
Materials
Pump body Cast Iron
Impeller Brass
Performance
Maximum head (closed valve) 72 metres
Performance @ 9 l/min 56 metres
Performance @ 18 l/min 43 metres
Maximum flow 49 l/min
Minimum static inlet pressure 0.1 bar (1 metre)
Maximum static inlet pressure 1.4 bar (14 metres)
Maximum viscosity 50 secs redwood no 1 9.5 centistokes
Maximum working pressure* 850 kPa (8.5 bar)
Maximum ambient air temperature 50 °C
Min / Max water temperature Min 4 °C / Max 60 °C
Maximum suction lift** 4.6 metres
Connections
Pump connections G 1 female
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 5 l/min and above
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 4.9 Amps
Power consumption 1087 Watts
Fuse rating 13 Amps
Physical
Enclosure protection IP44
Length 283 mm
Width 145 mm
Height (excluding hoses) 177 mm
Weight (including fittings) 10.3 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.

** With footvalve fitted.


Pump Variants
Part no Description
46669 PH 45 ES CI, 230/1/50, NIT/CAR/CER
46732 PH 75 ES CI, 230/1/50, NIT/CAR/CER
46733 PH 95 ES CI, 230/1/50, NIT/CAR/CER