Jet 80-45 B (50 Hz) - Centrifugal jet boostamatic pump


Ideal for the high pressure delivery of clean non-potable water from a water tank/cistern in either a positve or negative head appplication.  Jet Boostamatic pumps provide fully automatic pressure/flow switch control and are supplied with a power lead fitted with a 13 Amp fused plug.  The range is suitable for general purpose applications, pumping cold water.


  • Designed for pumping clean non-potable water. The portable Jet pump is ideal for many household and light industrial uses.
  • Water pressurisation and lawn sprinkler boosting are just two of its many applications.

Technical Specification

Product code 46620
Guarantee 1 year
Pump type Centrifugal
Mechanical seal EPDM / Carbon / Ceramic
Fully automatic control  
Built in 'no water' cut out  
Positive and negative head application  
Quiet operation  
Pump body Stainless steel
Impeller Plastic
Maximum head (closed valve) 4.5 bar
Performance @ 10 l/min 3.2 bar
Performance @ 40 l/min 2.2 bar
Maximum flow 80 l/min
Minimum static inlet pressure 0.1 bar (1 metre)
Maximum static inlet pressure 0.5 bar (5 metres)
Maximum static outlet pressure 1.3 bar (13 metres)
Maximum working pressure* 500 kPa (5 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 35 °C
Maximum suction lift 5 metres
Cut out flow 1 l/min (approx)
Cut in pressure 180 kPa (1.8 bar)
Pressure vessel air pre-charge 2.0 bar (29 psi)
Pump connections G 1 female
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1)
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 5.2 Amps
Power consumption 925 Watts
Fuse rating 13 Amps
Power cable (pre-wired) 1.5 metres
Enclosure protection IPX4
Length 376 mm
Width 216 mm
Height (excluding hoses) 327 mm
Weight (including fittings) 12.2 Kg

* The maximum pressure that can be applied to the pump under any installation conditions.

Pump Variants
Part no Description
46619 JET 55-45 B, 230/1/50 EPDM/CAR/CER
46620 JET 80-45 B, 230/1/50 EPDM/CAR/CER