PH 35 ES (50 Hz) - Peripheral horizontal end suction pump

PH ES

The PH ES range of peripheral pumps with horizontal suction and vertical delivery are designed for continuous operation at 5 l/min and above.  They offer a range of seal and motor options, providing flow rates up to 40 l/min and heads up to 42 metres.

Application

  • The range of PH ES peripheral pumps are designed to pump clean, fresh water. Other clean, non aggressive, non explosive liquids with similar characteristics to water may be pumped. The range can be used for pressure boosting, liquid transfer and distribution.

Technical Specification

General
Product code 46563
Guarantee 2 years
Features
Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Priming vent plug  
Materials
Pump body Brass
Impeller Brass
Performance
Maximum head (closed valve) 30 metres
Performance @ 9 l/min 20 metres
Performance @ 18 l/min 12 metres
Maximum flow 32 l/min
Minimum static inlet pressure 0.05 bar (0.5 metres)
Maximum static inlet pressure 1.4 bar (14 metres)
Maximum viscosity 50 secs redwood no 1 9.5 centistokes
Maximum working pressure* 600 kPa (6 bar)
Max. ambient air temperature (Continuous) 40 °C
Max. ambient air temperature (Intermittent) 50 °C
Min / Max water temperature Min 4 °C / Max 80 °C
Maximum suction lift** 4.6 metres
Connections
Pump connections G 1 female
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 5 l/min and above
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.95 Amps
Power consumption 450 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IP44
Length 241 mm
Width 132 mm
Height (excluding hoses) 169 mm
Weight (including fittings) 4.6 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.

** With footvalve fitted.


Pump Variants
Part no Description
46563 PH 35 ES, 230/1/50, EPDM/PTFE/Al. Oxide
46451 PH 35 ES, 230/1/50, VIT/CAR/SIL                              
46564 PH 45 ES, 230/1/50, EPDM/PTFE/Al. Oxide
46454 PH 45 ES, 230/1/50, VIT/CAR/SIL
46669 PH 45 ES CI, 230/1/50, NIT/CAR/CER