PH 45 ES B (50 Hz) - Peripheral horizontal end suction boostamatic pump

PH ES

The PH ES Boostamatic range of peripheral pressure switch pumps are designed to provide a pressurised water supply from a break tank in either positive or negative head applications and do not require a gravity flow of water to activate.

Application

  • All models are ideal for automated pressurisation of hot or cold water services in a single dwelling, or commercial premises

Technical Specification

General
Product code 46524
Guarantee 2 years
Features
Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Anti-vibration feet  
Run on timer 3 sec
Dry run protection  
Materials
Pump body Brass
Impeller Brass
Performance
Maximum head (closed valve) 41 metres
Performance @ 9 l/min 3.2 bar
Performance @ 18 l/min 2.2 bar
Maximum flow 42 l/min
Minimum static inlet pressure 0.1 bar (1 metre)
Maximum static inlet pressure 1.4 bar (14 metres)
Maximum static outlet pressure 1.3 bar (13 metres)
Maximum working pressure* 600 kPa (6 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Maximum suction lift*** 4.6 metres
Pressure vessel air pre-charge 0.9 bar (13 psi)
Connections
Pump connections G 1 female
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 5 l/min and above
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 2.9 Amps
Power consumption 665 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IP44
Length 257 mm
Width 133.5 mm
Height (excluding hoses) 292 mm
Weight (including fittings) 7.5 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.

** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

***With footvalve fitted


Pump Variants
Part no Description
46523 PH 35 ES B, 230/1/50, EPDM/PTFE/Al. Oxide
46524 PH 45 ES B, 230/1/50, EPDM/PTFE/Al. Oxide