The PH ES Automatic Flow Switch range of
peripheral pumps are ideal for the pressurisation of water to
outlets in a positive head application where a gravity flow of
approx. 1 l/min already exists.
Application
- The range is suitable for commercial or domestic use, pumping
hot or cold water
Technical Specification
General |
Product code |
46567 |
Guarantee |
2 years |
Features |
Pump type |
Peripheral |
Mechanical seal |
EPDM / PTFE / Al. Oxide |
Dry run protection |
|
Materials |
Pump body |
Brass |
Impeller |
Brass |
Performance |
Maximum head (closed valve) |
40 metres |
Performance @ 9 l/min |
33 metres |
Performance @ 18 l/min |
23 metres |
Maximum flow |
41 l/min |
Minimum static inlet pressure |
0.05 bar (0.5 metres) |
Maximum static inlet pressure |
1.0 bar (10 metres) |
Maximum working pressure* |
600 kPa (6 bar) |
Max. ambient air temperature (Continuous) |
40 °C |
Max. ambient air temperature (Intermittent) |
50 °C |
Min / Max water temperature |
Min 4 °C / Max 80 °C |
Flow switch sensitivity (approx) |
1 l/min |
Connections |
Pump connections |
G 1 female |
Motor |
Type |
Induction, auto-reset thermal trip |
Duty rating |
Continuous (S1) @ 5 l/min and above |
Electrical |
Power supply/phase/frequency |
230 V a.c./ 1 / 50 Hz |
Current (full load) |
2.9 Amps |
Power consumption |
665 Watts |
Fuse rating |
5 Amps |
Power cable (pre-wired) |
1.5 metres |
Physical |
Enclosure protection |
IP44 |
Length |
257 mm |
Width |
132 mm |
Height (excluding hoses) |
218 mm |
Weight (including fittings) |
6.6 Kg |
* The maximum pressure that can be applied to the pump under any
installation conditions.
Pump Variants |
Part no |
Description |
46566 |
PH 35 ES FL, 230/1/50, EPDM/PTFE/Al. Oxide |
46567 |
PH 45 ES FL, 230/1/50, EPDM/PTFE/Al. Oxide |