PH 35 TS (50 Hz) - Peripheral horizontal top suction pump

PH TS

The PH TS range of peripheral pumps with vertical suction and delivery are designed for continuous operation at 5 l/min and above. They offer a range of seal and motor options, providing flow rates up to 44 l/min and heads up to 42 metres.

Application

  • The PH TS range is particularly suitable where space is at a premium to pump clean, fresh water. Other clean non agressive, non explosive liquids with similar characteristics to water may be pumped.

Technical Specification

General
Product code 46496
Guarantee 2 years
Features
Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Priming vent plug  
Materials
Pump body Brass
Impeller Brass
Performance
Maximum head (closed valve) 30 metres
Performance @ 9 l/min 23 metres
Performance @ 18 l/min 14 metres
Maximum flow 34 l/min
Minimum static inlet pressure 0.05 bar (0.5 metres)
Maximum static inlet pressure 1.4 bar (14 metres)
Maximum viscosity 50 secs redwood no 1 9.5 centistokes
Maximum working pressure* 600 kPa (6 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 80 °C
Maximum suction lift** 4.6 metres
Connections
Pump connections G ¾ female
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 2.5 l/min and above
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 1.8 Amps
Power consumption 410 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IP44
Length 209 mm
Width 132 mm
Height (excluding hoses) 169 mm
Weight (including fittings) 4.4 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.

** With footvalve fitted.


Part Variants  
Part no Description
46496 PH 35 TS, 230/1/50, EPDM/PTFE/Al. Oxide c/w Vent Plug
46445 PH 35 TS, 230/1/50, VIT/CAR/SIL c/w Vent Plug                              
46504 PH 45 TS, 230/1/50,  EPDM/PTFE/Al. Oxide  c/w Vent Plug
46448 PH 45 TS, 230/1/50, VIT/CAR/SIL c/w Vent Plug