PH 45 TS FL (50 Hz) - Peripheral horizontal top suction auto flow switch pump

PH TS

Ideal for the pressurisation of water to outlets in a positive head application, where an instant boosted supply is required from a simple to install package.  The range is suitable for commercial and domestic use, pumping hot or cold water.  Requires a gravity flow of appoximately 1 l/min to activate.

Application

  • Ideal for the pressurisation of water to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial or domestic use, pumping hot or cold water

Technical Specification

General
Product code 46530
Guarantee 2 years
Features
Pump type Peripheral
Mechanical seal EPDM / PTFE / Al.Oxide
Dry run protection  
Materials
Pump body Brass
Impeller Brass
Performance
Maximum head (closed valve) 40 metres
Performance @ 9 l/min 33 metres
Performance @ 18 l/min 20 metres
Maximum flow 43 l/min
Minimum static inlet pressure 0.05 bar (0.5 metres)
Maximum static inlet pressure 1.0 bar (10 metres)
Maximum working pressure* 600 kPa (6 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 80 °C
Flow switch sensitivity (approx) 1 l/min
Connections
Pump connections G ¾ female (inlet), G ¾ male (outlet)
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 2.5 l/min and above
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 2.6 Amps
Power consumption 600 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IP44
Length 225 mm
Width 132 mm
Height (excluding hoses) 197 mm
Weight (including fittings) 6.3 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.


Pump Variants
Part no Description
46522 PH 35 TS FL, 230/1/50 EPDM/PTFE/Al. Oxide
46530 PH 45 TS FL, 230/1/50, EPDM/PTFE/Al. Oxide