PH 45 TS Stainless Steel - Peripheral horizontal top suction pump

PH TS

The pump body assembly and impeller are manufactured from cast 316 stainless steel with all other fluid exposed components being made of stainless steel or other non ferrous materials.

Application

  • Designed for continuous use, the stainless steel peripheral range is ideal for handling non-abrasive liquids and is developed specifically for beer, lager or cider dispensing
  • Also used for pumping demineralised water

Technical Specification

General
Product code 46628
Guarantee 2 years
Features
Pump type Peripheral
Mechanical seal EPDM / PTFE / Al. Oxide
Priming vent plug  
Materials
Pump body Stainless steel
Impeller Stainless steel
Performance
Maximum head (closed valve) 40 metres
Performance @ 10 l/min 29.5 metres
Performance @ 25 l/min 12 metres
Maximum flow 38 l/min
Minimum static inlet pressure 0.05 bar (0.5 metres)
Maximum static inlet pressure 2.0 bar (20 metres)
Maximum viscosity 50 secs redwood no 1 9.5 centistokes
Maximum working pressure* 600 kPa (6 bar)
Maximum ambient air temperature 40 °C
Min / Max water temperature Min 4 °C / Max 80 °C
Maximum suction lift** 4.6 metres
Connections
Pump connections G ¾ male
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 2.5 l/min and above
Electrical
Power supply/phase/frequency 230 V a.c./ 1 / 50 Hz
Current (full load) 2.4 Amps
Power consumption 520 Watts
Fuse rating 5 Amps
Power cable (pre-wired) 1.5 metres
Physical
Enclosure protection IP44
Length 249 mm
Width 130 mm
Height (excluding hoses) 166 mm
Weight (including fittings) 6.3 Kg


* The maximum pressure that can be applied to the pump under any installation conditions.

** With footvalve fitted.


Pump Variants
Part no Description
46628 PH 45 TS S, 230/1/50, EPDM/PTFE/Al. Oxide
46629 PH 45 TS S, 230/1/50, VIT/CAR/SIL