Mainsboost Flomate MBF 60-1-15 | Water Pressure Booster Pump and Accumulator

MAINSBOOST

MAINSBOOST Flomate MBF 60

Find a Local Stockist

Find an Online Stockist

Mains Boost System

FLOMATE MBF 60 can be connected directly to the incoming mains and will deliver up to 16 litres/minute flow at 3.2 bar pressure to multiple outlets within the property, up to the preset cut-in limit of the 60 litre pressure vessel, at which time the system will deliver 12 litres/minute until demand ends and the pressure vessel recharges.

Designed for low occupancy properties with one bathroom and fits neatly within a standard 500 mm kitchen base unit.

Key Features

3 year warranty

Output flow rate up to 16 litres/minute

Increases mains water pressure up to 3.2 bar

Resources & Downloads

RESIDENTIAL PRODUCT BROCHURE - FLIPBOOK

RESIDENTIAL PRODUCT BROCHURE - PDF

FLOMATE MBF 60 | 80 PRODUCT DATA SHEET

FLOMATE MBF 60 | 80 PRODUCT INSTALLATION GUIDE

Mainsboost Site Survey Form (Off-Line PDF)

Technical Specification

Product Code	46631
General
Warranty	3 years
WRAS	WRAS Approved Product (2005033)
Conformity Certification	UKCA, CE
Features
Pump type	Peripheral
Flexible hoses	2
Pressure vessel nominal size	60 litres
Pressure vessel usable capacity	33 litres
Upstream line-in kit	15 mm
Mounting	Floor or plinth
Dry run protection
Typical noise	From 46 dB(A)
Materials
Pressure vessel	Epoxy coated steel
Membrane	Butyl rubber
Pump body	Brass
Impeller	Brass
Mechanical seal	EPDM / PTFE / Al. Oxide
Performance
Maximum head - closed valve	3.2 bar (32 metres)
Maximum flow	16 l/min
Maximum working pressure*	450 kPa (4.5 bar)
Maximum ambient air temperature	40 ^oC
Min / Max water temperature	Min 4 ^oC / Max 35 ^oC
Flow switch sensitivity	0.6 l/min (approx)
Connections
Connection - inlet	G ¾ M
Connection - outlet	G ¾ M
Flexible hoses
Connections	G ¾ female x 15 mm push-in x 200 mm long
Motor
Type	Induction (auto-reset thermal trip)
Duty rating	Continuous (S1)
Electrical
Power supply (Vac/Ph/Hz)	230 V a.c. / 1 / 50 Hz
Power consumption - P1	365 Watts
Current - full load	1.7 Amps
Fuse rating	5 Amps
Power cable length	1.5 metres (pre-wired)
Physical
Enclosure protection	IPX4
Width	480 mm
Depth	457 mm
Height - excluding hoses	663 mm
Weight - including fittings	19.7 Kg
Weight - filled	52.7 Kg
Weight - maximum	79.7 Kg
GTIN 13 DIGIT	5050400466314
*	The maximum pressure that can ba applied to the system under any installation conditions.

Accessories

Pressure & Flow Test Kit PTK 1 Pro 60

MAINSBOOST