Mainsboost iBoost F200-100-45

Mainsboost

Integrated Booster System

Inadequate flow rates and water pressure are common shortcomings for many properties, often resulting in underperforming showers and water using appliances. MAINSBOOST iBOOST offers a solution.
These fully integrated systems combine a 200 litre cold water storage tank and a high performance, multistage pump to overcome restricted water flow and insufficient pressure.

The iBOOST F200 features simple to operate fixed speed controls and is capable of generating pressures of up to 4.5 bar and flow rates of up to 100 litres per minute, typically operating at 60 litres per minute at 3.0 bar pressure.

Key Features

3 year warranty

Compact, space saving design, fits within a 600mm cupboard

Boosts cold water mains supply to 4.5 bar

Resources & Downloads

MAINSBOOST iBOOST DATA SHEET

MAINSBOOST iBOOST INSTALLATION GUIDE

Mainsboost iBoost F200 Performance Curve

Mainsboost iBoost F200, V200 & CAT 5 Dimensional

Mainsboost Site Survey Form (Off-Line PDF)

Technical Specification

Product Code	46668
General
GTIN	5050400466680
Warranty	3 years
WRAS	WRAS Approved Product (2301305)
Conformity Certification	UKCA \| CE
Features
Pump control system	Fixed speed, pressure switch
Control interface	Standard controls
Flexible connection hose - outlet
Dry run protection
System check valve
Typical noise	62 dB(A)
Fluid category	CAT 3, CAT 4
Water tank air gap	Type AF
Pressure vessel	8 litres (10 bar)
Performance
Maximum head - nominal closed valve	4.5 bar (45 metres)
Maximum flow rate	100 l/min
Maximum inlet pressure -static	7 bar (700 kPa)
Maximum outlet pressure - static	15 metres
Ambient air temperature	Min 4 ^oC - Max 30 ^oC
Water tank
Nominal water tank size	220 litres
Usable water capacity	200 litres
Float valve type	Equilibrium
Water tank fill rate	20 l/min*
Connections
Inlet connection	G ½ M
Pump outlet connection	G ¾ male
Outlet flexible hose	G ¾ female x 22 mm push-in (220 mm long)
Overflow	G 1¼ compression
Materials
Water tank	Polyethylene
Front panel	Acrylic capped ABS
Pump
Pump type	Multistage centrifugal
Pump body	Brass / stainless steel
Pump impeller	Stainless steel
Duty rating	Continuous (S1) @ 5 l/min and above
Motor type	Induction motor (auto-reset thermal trip)
Electrical
Power supply (Vac/Ph/Hz)	230 V a.c. / 1 / 50 Hz
Power consumption - P1	1260 Watts
Current - full load	5.5 Amps
Fuse rating	10 Amps
Power cable length	3 metres (pre-wired)
Physical
Width	536 mm
Depth	529 mm
Height	1504 mm
Weight - including fittings	55 Kg
Weight - filled	255 Kg
*	Assumes 1 bar inlet pressure

Accessories

MAINSBOOST iBOOST +200

Pressure & Flow Test Kit PTK 1 Pro 60

Mainsboost