Monsoon

Monsoon S1.5 bar Twin

Find a Local Stockist

Find an Online Stockist

Standard Twin

Monsoon Standard 1.5 bar Twin Shower Pump. Designed for installation into vented systems to pump both hot & cold water supplies, boosting both equally to an individual shower, complete bathroom, or whole house. Suitable for positive head applications only.

5 Year Warranty WRAS Approved Product UKCA-CE
Monsoon  S1.5 bar Twin Monsoon  S1.5 bar Twin
Monsoon  S1.5 bar Twin
Monsoon  S1.5 bar Twin
Key Features
  • 5 year warranty
  • 1.5 bar pressure
  • Suitable for positive head applications
Technical Specification
Product Code 46506
General
Warranty 5 years
WRAS WRAS Approved Product (1904040)
Conformity Certification UKCA, CE
Features
Pump type Peripheral
Pump control Flow switch
Mechanical seal EPDM / PTFE / Al. Oxide
Anti-vibration feet
Inlet strainer(s)
Flexible hoses 4
Dry run protection
Typical noise 48 dB(A)
Materials
Pump body Brass
Impeller Brass
Performance
Maximum head - closed valve 1.5 bar / 15 metres
Performance @ 9 l/min 1.2 bar
Performance @ 18 l/min 1.1 bar
Maximum flow 49 l/min
Maximum static inlet pressure 14 metres
Maximum working pressure* 600 kPa / 6 bar
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity 0.6 l/min (approx)
Connections
Pump connections (Inlet) G ¾ M
Pump connections (Outlet) G ¾ M
Flexible hoses
Connections (UK model) G ¾ female x 22 mm push-in 300 mm long Isolating valves on all hoses
Connections (ROI model) G ¾ female x 21 mm push-in 300 mm long Isolating valves on all hoses
Connections (Export model) G ¾ female x G ¾ female 300 mm long
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 9 l/min and above***
Electrical
Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 345 Watts
Current - full load 1.5 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres (pre-wired)
Physical
Enclosure protection IPX4
Length 265 mm
Width 126 mm
Height - excluding hoses 202 mm
Weight - including fittings 7.2 Kg
GTIN 13 DIGIT 5050400465065
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
***  Both heads pumping 4.5 l/min and above.
Videos