| Product Code |
46498 |
| General |
|
| Guarantee |
5 years |
| WRAS approval |
1906076 |
| Approvals |
WRAS, CE |
| Features |
|
| Pump type |
Peripheral |
| Pump control |
Pressure & Flow Switch |
| Mechanical seal |
EPDM / PTFE / Al. Oxide |
| Anti-vibration feet |
|
| Inlet strainer(s) |
|
| Flexible hoses |
2 |
| Run on timer |
3 seconds |
| Dry run protection |
|
| Typical noise |
42 dB(A) |
| Materials |
|
| Pump body |
Brass |
| Impeller |
Brass |
| Performance |
|
| Maximum head - closed valve |
2.0 bar / 20 metres |
| Performance @ 9 l/min |
1.2 bar |
| Performance @ 18 l/min |
N/A |
| Maximum flow |
18 l/min |
| Maximum static inlet pressure |
8 metres |
| Maximum static outlet pressure |
8 metres |
| Maximum working pressure* |
600 kPa / 6 bar |
| Maximum ambient air temperature |
40 °C |
| Min / Max water temperature** |
Min 4 °C / Max 65 °C |
| Flow switch sensitivity |
0.6 l/min (approx) |
| Pressure vessel air pre-charge |
0.9 bar / 13 psi |
| Connections |
|
| Pump connections (Inlet) |
G ¾ M |
| Pump connections (Outlet) |
G ¾ M |
| Flexible hoses |
|
| Connections (UK model) |
G ¾ female x 22 mm push-in
300 mm long
Isolating valves on all hoses |
| Connections (ROI model) |
G ¾ female x 21 mm push-in
300 mm long
Isolating valves on all hoses |
| Connections (Export model) |
G ¾ female x G ¾ female
300 mm long |
| Motor |
|
| Type |
Induction, auto-reset thermal trip |
| Duty rating |
Continuous (S1) @ 9 l/min and above |
| Electrical |
|
| Power supply (Vac/Ph/Hz) |
230 V a.c. / 1 / 50 Hz |
| Power consumption - P1 |
250 Watts |
| Current - full load |
1.1 Amps |
| Fuse rating |
5 Amps |
| Power cable length |
1.5 metres (pre-wired) |
| Physical |
|
| Enclosure protection |
IPX4 |
| Length |
200 mm |
| Width |
162 mm |
| Height - excluding hoses |
243 mm |
| Weight - including fittings |
6.6 Kg |
| GTIN 13 DIGIT |
5050400464983 |
| * |
The maximum pressure that can be applied to the pump under any installation conditions. |
| ** |
A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas. |