| Product Code |
46502 |
| General |
|
| Warranty |
3 years |
| WRAS approval |
1504701 |
| Approvals |
WRAS, CE |
| Features |
|
| Pump type |
Peripheral |
| Pump control |
Flow Switch |
| Anti-vibration feet |
|
| Flexible hoses |
4 |
| Dry run protection |
|
| Typical noise |
52 dB(A) |
| Materials |
|
| Pump body |
Plastic |
| Impeller |
Plastic |
| Mechanical seal |
EPDM / PTFE / Al. Oxide |
| Performance |
|
| Maximum head - closed valve |
1.5 bar / 15 metres |
| Performance @ 9 l/min |
1.1 bar / 11 metres |
| Performance @ 18 l/min |
0.6 bar / 6 metres |
| Maximum flow |
32 l/min |
| Maximum static inlet pressure |
10 metres |
| Maximum working pressure* |
300 kPa / 3.0 bar |
| Maximum ambient air temperature |
40 °C |
| Min / Max water temperature** |
Min 4 °C / Max 65 °C |
| Flow switch sensitivity |
0.8 l/min (approx) |
| Connections |
|
| Pump connections (Inlet) |
G ¾ M |
| Pump connections (Outlet) |
G ¾ M |
| Flexible hoses |
|
| Connections (UK model) |
G ¾ female x 15 mm push-in x 200 mm long Isolating valves on inlet hoses |
| Motor |
|
| Type |
Induction, auto-reset thermal trip |
| Duty rating |
Intermittent S3 (30 mins on / 30 mins off @ 9 l/min) |
| Electrical |
|
| Power supply (Vac/Ph/Hz) |
230 V a.c. / 1 / 50 Hz |
| Power consumption - P1 |
385 Watts |
| Current - full load |
1.7 Amps |
| Fuse rating |
5 Amps |
| Power cable length |
1.5 metres (pre-wired) |
| Physical |
|
| Enclosure protection |
IP22 |
| Length |
231 mm |
| Width |
132 mm |
| Height - excluding hoses |
166 mm |
| Weight - including fittings |
4.7 Kg |
| GTIN 13 DIGIT |
5050400465027 |
| * |
The maximum pressure that can be applied to the pump under any installation conditions. |
| ** |
A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas. |