Product Code |
46407 |
General |
|
Warranty |
3 years |
WRAS approval |
1709101 |
Approvals |
WRAS, CE |
Features |
|
Pump type |
Peripheral |
Pump control |
Flow Switch |
Mechanical seal |
EPDM / PTFE / Al. Oxide |
Anti-vibration feet |
|
Flexible hoses |
4 |
Dry run protection |
|
Typical noise |
55 dB(A) |
Materials |
|
Pump body |
Plastic |
Impeller |
Plastic |
Performance |
|
Maximum head - closed valve |
1.8 bar / 18 metres |
Performance @ 9 l/min |
1.5 bar |
Performance @ 18 l/min |
0.8 bar |
Maximum flow |
33 l/min |
Maximum static inlet pressure |
13 metres |
Maximum working pressure* |
380 kPa / 3.8 bar |
Maximum ambient air temperature |
40 °C |
Min / Max water temperature** |
Min 4 °C / Max 65 °C |
Flow switch sensitivity |
0.8 l/min (approx) |
Connections |
|
Pump connections (Inlet) |
G ¾ M |
Pump connections (Outlet) |
G ¾ M |
Flexible hoses |
|
Connections |
G ¾ female x 15 mm push-in x 200 mm long Isolating valves on inlet hoses |
Motor |
|
Type |
Induction, auto-reset thermal trip |
Duty rating |
Continuous (S1) @ 9 l/min and above*** |
Electrical |
|
Power supply (Vac/Ph/Hz) |
230 V a.c. / 1 / 50 Hz |
Power consumption - P1 |
405 Watts |
Current - full load |
1.8 Amps |
Fuse rating |
5 Amps |
Power cable length |
1.5 metres (pre-wired) |
Physical |
|
Enclosure protection |
IP22 |
Length |
304 mm |
Width |
132 mm |
Height - excluding hoses |
179 mm |
Weight - including fittings |
4.6 Kg |
GTIN 13 DIGIT |
5050400464075 |
* |
The maximum pressure that can be applied to the pump under any installation conditions. |
** |
A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas. |
*** |
Both heads pumping 4.5 l/min and above. |