Showermate S2.6 bar Single

Find a Local Stockist

Find an Online Stockist

Standard Single

Showermate Standard 2.6 bar Single Shower Pump. Designed to improve water supplies to single taps or to pump blended water from a shower mixer. Suitable for positive head applications only.

3 Year Warranty WRAS Approved Product
Showermate  S2.6 bar Single
Key Features
  • 2.6 bar pressure
  • Suitable for positive head applications
  • High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves
Technical Specification
Product Code 46429
Warranty 3 years
WRAS approval 1709101
Approvals WRAS, CE
Pump type Peripheral
Pump control Flow Switch
Mechanical seal EPDM / PTFE / Al. Oxide
Anti-vibration feet
Flexible hoses 2
Dry run protection
Typical noise 52 dB(A)
Pump body Plastic
Impeller Plastic
Maximum head - closed valve 2.6 bar / 26 metres
Performance @ 9 l/min 1.3 bar
Maximum flow 18 l/min
Maximum static inlet pressure 13 metres
Maximum working pressure* 380 kPa / 3.8 bar
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity 0.8 l/min (approx)
Pump connections (Inlet) G ¾ M
Pump connections (Outlet) G ¾ M
Flexible hoses
Connections G ¾ female x 15 mm push-in x 200 mm long Isolating valves on inlet hose
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 9 l/min and above
Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 245 Watts
Current - full load 1.1 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres (pre-wired)
Enclosure protection IP22
Length 223 mm
Width 132 mm
Height - excluding hoses 179 mm
Weight - including fittings 4.0 Kg
GTIN 13 DIGIT 5050400464297
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.