Showermate TP S2.0 bar Twin

Find a Local Stockist

Find an Online Stockist

Standard Twin

Showermate TP Standard 2.0 bar Twin Shower Pump. Designed to boost the hot & cold water supply to an individual shower, bath, shower mixer or mixer tap. Suitable for positive head applications only.

1 Year Warranty WRAS Approved Product UKCA-CE
Showermate tp  S2.0 bar Twin
Key Features
  • 2.0 bar pressure
  • Suitable for positive head applications
  • High quality entry level plastic pump supplied with 15 mm flexible hoses
Technical Specification
Product Code 49085
Warranty 1 year
WRAS WRAS Approved Product (1506334)
Conformity Certification UKCA, CE
Pump type Centrifugal
Pump control Flow Switch
Anti-vibration feet
Inlet strainer(s)
Flexible hoses 4
Dry run protection
Typical noise 53 dB(A)
Pump body Plastic
Impeller Plastic
Mechanical seal EPDM / Carbon / Al.Oxide
Maximum head - closed valve 2.0 bar / 20 metres
Performance @ 9 l/min 1.5 bar
Performance @ 18 l/min 0.9 bar
Maximum flow 35 l/min
Maximum static inlet pressure 10 metres
Maximum working pressure* 300 kPa / 3.0 bar
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity 0.8 l/min (approx)
Pump connections (Inlet) G ¾ M
Pump connections (Outlet) G ¾ M
Flexible hoses
Connections (Inlet) G ¾ female x 15 mm push-in x 185 mm long
Connections (Outlet) G ¾ female x 15 mm push-in x 175 mm long
Type Series wound, manual reset thermal trip
Duty rating Intermittent S3 (30 mins on / 30 mins off @ 9 l/min)***
Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 300 Watts
Current - full load 1.5 Amps
Fuse rating 3 Amps
Power cable length 1.5 metres (pre-wired)
Enclosure protection IPX2
Length 250 mm
Width 97 mm
Height - excluding hoses 152 mm
Weight - including fittings 2.6 Kg
GTIN 13 DIGIT 5050400490852
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
***  Both heads pumping 4.5 l/min and above.