Showermate U1.8 bar Twin

Find a Local Stockist

Find an Online Stockist

Universal Twin

Showermate Universal 1.8 bar Twin Shower Pump. Designed to boost the incoming hot & cold water supply to a shower, bath, shower mixer or mixer tap. Suitable for both positive & negative head applications.

3 Year Warranty WRAS Approved Product
Showermate  U1.8 bar Twin
Key Features
  • 1.8 bar pressure
  • Suitable for positive or negative head applications
  • High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves
Technical Specification
Product Code 46532
Warranty 3 years
WRAS approval 1707078
Approvals WRAS, CE
Pump type Peripheral
Pump control Pressure & flow switch
Mechanical seal EPDM / PTFE / Al. Oxide
Anti-vibration feet
Flexible hoses 4
Run on timer 3 seconds
Dry run protection
Typical noise 55 dB(A)
Pump body Plastic
Impeller Plastic
Maximum head - closed valve 1.8 bar / 18 metres
Performance @ 9 l/min 1.4 bar
Performance @ 18 l/min 0.8 bar
Maximum flow 33 l/min
Maximum static inlet pressure 6 metres
Maximum static outlet pressure 6 metres
Maximum working pressure* 380 kPa / 3.8 bar
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity 0.8 l/min (approx)
Pressure vessel air pre-charge 1.5 bar / 21.75 psi
Pump connections (Inlet) G ¾ M
Pump connections (Outlet) G ¾ M
Flexible hoses
Connections G ¾ female x 15 mm push-in  x 200 mm long Isolating valves on inlet hoses
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 9 l/min and above***
Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 440 Watts
Current - full load 1.9 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres (pre-wired)
Enclosure protection IP22
Length 305 mm
Width 163 mm
Height - excluding hoses 373 mm
Weight - including fittings 5.5 Kg
GTIN 13 DIGIT 5050400465324
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
***  Both heads pumping 4.5 l/min and above.