Showermate

Showermate U2.6 bar Single

Find a Local Stockist

Find an Online Stockist

Universal Single

Showermate Universal 2.6 bar Single Shower Pump can be used in pairs to pump hot & cold water supplies independently, or as a single pump to boost water supply as required. Suitable for both positive & negative head applications.

3 Year Warranty WRAS Approved Product
Showermate  U2.6 bar Single
Key Features
  • 2.6 bar pressure
  • Suitable for positive or negative head applications
  • High quality, high performing plastic pump supplied with 15 mm flexible hoses with integral ISO valves
Technical Specification
Product Code 46534
General
Warranty 3 years
WRAS approval 1707078
Approvals WRAS, CE
Features
Pump type Peripheral
Pump control Pressure & Flow Switch
Mechanical seal EPDM / PTFE / Al. Oxide
Anti-vibration feet
Flexible hoses 2
Run on timer 3 seconds
Dry run protection
Typical noise 52 dB(A)
Materials
Pump body Plastic
Impeller Plastic
Performance
Maximum head - closed valve 2.6 bar / 26 metres
Performance @ 9 l/min 1.3 bar
Performance @ 18 l/min 0.3 bar
Maximum flow 18 l/min
Maximum static inlet pressure 6 metres
Maximum static outlet pressure 6 metres
Maximum working pressure* 380 kPa / 3.8 bar
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity 0.8 l/min (approx)
Pressure vessel air pre-charge 1.5 bar / 21.75 psi
Connections
Pump connections (Inlet) G ¾ M
Pump connections (Outlet) G ¾ M
Flexible hoses
Connections G ¾ female x 15 mm push-in x 200 mm long Isolating valves on inlet hoses
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1) @ 9 l/min and above
Electrical
Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 280 Watts
Current - full load 1.2 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres (pre-wired)
Physical
Enclosure protection IP22
Length 233 mm
Width 163 mm
Height - excluding hoses 373 mm
Weight - including fittings 4.7 Kg
GTIN 13 DIGIT 5050400465348
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
Videos
Video

An introduction to the new range of Showermate shower pumps