| Product Code |
47717 |
| GENERAL |
|
| GTIN |
5050400477174 |
| Warranty |
3 years (upon registration with proof of purchase) |
| WRAS |
WRAS Approved Product |
| Conformity certification |
UKCA | CE |
| TECHNICAL FEATURES |
|
| Pump type |
Peripheral |
| Anti-vibration flexible hoses |
|
| Pressure vessel nominal size |
200 litres |
| Pressure vessel usable capacity |
110 litres |
| Upstream line-in kit |
15 mm |
| Mounting |
Floor |
| Dry run protection |
|
| PERFORMANCE |
|
| Maximum head - closed valve |
3.2 bar (32 metres) |
| Maximum flow* |
Up to 22 litres/min for up to 11 minutes |
| Maximum working pressure** |
450 kPa (4.5 bar) |
| Maximum ambient air temperature |
40 °C |
| Min / Max water temperature |
Min 4 °C / Max 35 °C |
| Flow switch sensitivity |
0.6 litres/min (approx) |
| CONSTRUCTION |
|
| Enclosure protection |
IPX4 |
| Pressure vessel / membrane |
Epoxy coated steel / butyl rubber |
| Pump head |
Brass |
| Pump impeller |
Brass |
| Pump head mechanical seal |
EPDM / PTFE / Al. Oxide |
| CONNECTIONS |
|
| Pump connections |
G ¾ M |
| Anti-vibration hoses |
G ¾ F x 15 mm push-fit x 200 mm long |
| MOTOR |
|
| Type |
Induction (auto-reset thermal trip) |
| Duty rating |
Continuous (S1) |
| ELECTRICAL |
|
| Power supply (Vac/Ph/Hz) |
165-265 V a.c. / 1 / 50-60 Hz |
| Power consumption (P1) |
340 Watts |
| Current (full load) |
1.5 Amps |
| Fuse rating |
5 Amps |
| Power cable length |
1.5 metres |
| DIMENSIONS |
|
| Height - excluding hoses |
1422 mm |
| Width |
533 mm |
| Depth |
533 mm |
| WEIGHT |
|
| Weight - including fittings |
43.1 kg |
| Weight - filled |
153.1 kg |
| Weight - maximum*** |
243.1 kg |
| NOTES |
|
| * |
The actual flow rate may be less than this and is dependent on the mains supply flow available. |
| ** |
The maximum pressure that can be applied to the pump under any installation conditions. |
| *** |
The absolute maximum weight of the unit under fault conditions in which the vessel is completely filled with water |