Stuart

Stuart CH 9-14 FL (50Hz)

Find a Local Stockist

Find an Online Stockist

Centrifugal Horizontal Pump Single Stage

Ideal for the pressurisation of water to outlets in a positive head application where an instant boosted supply is required from a simple to install package. The range is suitable for commercial or domestic use, pumping hot or cold water and supplied with G 1 flexible hoses.

Key Features
  • Flow rates up to 120 litres per minute and heads up to 14 metres
  • Automatic flow switch control
  • No pulsing during operation
Technical Specification
Product Code 46387
General
Guarantee 2 years
WRAS approval 1709116
Approvals WRAS, CE
Features
Pump type Centrifugal Single Stage
Pump control Flow Switch
Anti-vibration feet
Inlet strainer(s)
Flexible hoses 2
Dry run protection
Priming vent plug
Typical noise 57 dB(A)
Materials
Pump body Brass
Impeller Plastic
Mechanical seal EPDM / PTFE / Al. Oxide
Performance
Maximum head - closed valve 1.4 bar / 14 metres
Performance @ 50 l/min 1.09 bar / 11.1 metres
Performance @ 100 l/min 0.41 bar / 4.2 metres
Maximum flow (l/min) 120 l/min
Minimum static inlet pressure 0.1 bar / 1 metre
Maximum static inlet pressure 1.4 bar / 14 metres
Maximum working pressure* 600 kPa / 6 bar
Maximum ambient air temperature 40 °C
Min / Max water temperature** Min 4 °C / Max 65 °C
Flow switch sensitivity 1 l/min (approx)
Connections
Pump connections (Inlet) G 1 M
Pump connections (Outlet) G 1 M
Flexible hoses
Connections G 1 M x G 1 F x 300 mm long
Anti-vibration hose (diameter) G 1
Motor
Type Induction, auto-reset thermal trip
Duty rating Continuous (S1)
Electrical
Power supply (Vac/Ph/Hz) 230 V a.c. / 1 / 50 Hz
Power consumption - P1 445 Watts
Current - full load 2.0 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres (pre-wired)
Physical
Enclosure protection IPX4
Length 273 mm
Width 133 mm
Height -excluding hoses 264 mm
Weight - including fittings 7.7 Kg
GTIN 13 DIGIT 5050400463870
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
Compare Models
Description Part Number
Stuart CH 9-14 FL (50Hz) 46387
Videos