Stuart PH 35 ES B (50 Hz)

Find a Local Stockist

Find an Online Stockist

Peripheral Horizontal Pump

Designed to provide a pressurised water supply from a break tank in either a positive or negative head application, as it does not rely on gravity flow to activate. The range is suitable for commercial or domestic use, pumping hot or cold water.

Key Features
  • Peripheral pump
  • Flow rates up to 33 litres per minute and heads up to 30 metres
  • End suction, vertical delivery connections
Technical Specification
Product Code 46523
Guarantee 2 years
WRAS status Approved Materials
Approvals CE
Pump type Peripheral
Pump control Pressure/Flow Switch
Anti-vibration feet
Run on timer (seconds) 3 seconds
Dry run protection
Priming vent plug
Pump body Brass
Impeller Brass
Pump mechanical seal EPDM/PTFE/Al. Oxide
Maximum head - closed valve (bar / metres) 30 metres
Performance @ 9 l/min (bar / metres) 20 metres
Performance @ 18 l/min (bar / metres) 12 metres
Maximum flow (l/min) 33 l/min
Minimum static inlet pressure (metres) 1 metres
Maximum static inlet pressure (metres) 14 metres
Maximum static outlet pressure (metres) 13 metres
Maximum working pressure* (kPa / bar) 600 kPa / 6 bar
Maximum ambient air temperature (°C) 40 °C
Min / Max water temperature (°C)** Min 4 °C / Max 65 °C
Pressure vessel air pre-charge (bar / psi) 0.9 bar / 13 psi
Maximum suction lift (metres) 4.6 metres
Pump connections (Inlet) G 1 F
Pump connections (Outlet) G 1 F
Type Induction, auto-reset thermal trip
Duty rating *** Continuous (S1) @ 5 l/min and above
Noise range dB(A) From 50 dB(A)

Power supply (VAC/PH/HZ)

230 Va.c. / 1 / 50Hz

Power consumption - P1 (Watts) 450 Watts
Current - full load (Amps) 1.95 Amps
Fuse rating (Amps) 5 Amps
Power cable length (metres) 1.5 metres
Enclosure protection IP 44
Width (mm) 255
Depth (mm) 133.5
Height (mm) 292
Weight - including fittings (Kg) 6
GTIN 13 DIGIT 5050400465232