Stuart

Stuart PH 45 ES FL (50 Hz)

Find a Local Stockist

Find an Online Stockist

Peripheral Horizontal Pump

Ideal for the pressurisation of water to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial and domestic use, pumping hot or cold water.

Key Features
  • Peripheral pump
  • Flow rates up to 41 litres per minute and heads up to 40 metres
  • End suction, vertical delivery connections
Technical Specification
Product Code 46567
Guarantee 2 years
WRAS status Approved Materials
Approvals CE
Pump type Peripheral
Pump control Flow Switch
Dry run protection
Priming vent plug
Pump body Brass
Impeller Brass
Pump mechanical seal EPDM/PTFE/Al. Oxide
Maximum head - closed valve (bar / metres) 40 metres
Performance @ 9 l/min (bar / metres) 33 metres
Performance @ 18 l/min (bar / metres) 23 metres
Maximum flow (l/min) 41 l/min
Minimum static inlet pressure (metres) 0.5 metres
Maximum static inlet pressure (metres) 10 metres
Maximum working pressure* (kPa / bar) 600 kPa / 6 bar
Maximum ambient air temperature (°C) 40 °C
Maximum ambient air temperature - Intermittent (°C) 50 °C
Min / Max water temperature (°C)** Min 4 °C / Max 80 °C
Flow switch sensitivity - approx (l/min) 1 l/min
Pump connections (Inlet) G 1 F
Pump connections (Outlet) G 1 F
Type Induction, auto-reset thermal trip
Duty rating *** Continuous (S1) @ 5 l/min and above
Noise range dB(A) From 50 dB(A)

Power supply (VAC/PH/HZ)

230 Va.c. / 1 / 50Hz

Power consumption - P1 (Watts) 665 Watts
Current - full load (Amps) 2.9 Amps
Fuse rating (Amps) 5 Amps
Power cable length (metres) 1.5 metres
Enclosure protection IP 44
Width (mm) 257
Depth (mm) 132
Height (mm) 218
Weight - including fittings (Kg) 6.6
GTIN 13 DIGIT 5050400465676
Videos