Stuart

Stuart PH 45 ES FL (60 Hz)

Find a Local Stockist

Find an Online Stockist

Peripheral Horizontal Pump

Ideal for the pressurisation of water to outlets in a positive head application, where an instant boosted supply is required from a simple to install package. The range is suitable for commercial and domestic use, pumping hot or cold water.

Key Features
  • Peripheral pump
  • Flow rates up to 43 litres per minute and heads up to 38 metres
  • End suction, vertical delivery connections
Technical Specification
Product Code 46652
General
Guarantee 1 year
Approvals CE
Features
Pump type Peripheral
Pump controls Flow switch
Dry run protection
Priming vent plug
Typical noise 64 dB(A)
Materials
Pump body Brass
Impeller Brass
Mechanical seal EPDM / PTFE / Al.Oxide
Performance
Maximum head - closed valve 3.8 bar / 38 metres
Performance @ 9 l/min 3.3 bar / 33 metres
Performance @ 18 l/min 2.1 bar / 21 metres
Maximum flow 43 l/min
Minimum static inlet pressure 0.05 bar / 0.5 metres
Maximum static inlet pressure 1 bar / 10 metres
Maximum working pressure* 600 kPa / 6 bar
Maximum ambient air temperature (continuous) 40 oC
Maximum ambient air temperature (intermittent) 50 oC
Min / Max water temperature Min 4 oC / Max 80 oC
Flow switch snsitivity 1 l/min (approx)
Connections
Pump connections (inlet) G 1 female
Pump connections (outlet) G 1 female
Motor
Type Induction, auto-reset themal trip
Duty rating Continuous (S1) @ 5 l/min and above
Electrical
Power supply (Vac/Ph/Hz) 220 V a.c. / 1 / 60 Hz
Power consumption - P1 640 Watts
Current - full load 2.9 Amps
Fuse rating 5 Amps
Power cable length 1.5 metres (pre-wired)
Physical
Enclosure protection IP44
Length 272 mm
Width 132 mm
Height - excluding hoses 218 mm
Weight - including fittings 6.6 Kg
* The maximum pressure that can be applied to the pump under any installation conditions.
Videos