Mainsboost MB 100CV-1-22 | Mains Boost Accumulator

MAINSBOOST

MAINSBOOST MB 100CV

Find a Local Stockist

Find an Online Stockist

Mains Water Boosting System

MAINSBOOST Composite offers all the performance benefits of the standard MAINSBOOST range, housed in a vessel which is 30% lighter than the standard MAINSBOOST steel vessel.
Their lightweight composite body makes them easy to manoeuvre and install in places with difficult access.
The unique construction of the MAINSBOOST Composite vessel ensures exceptional standards of water hygiene and makes them the preferred choice for health care facilities.

The MAINSBOOST MB 100CV is designed for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on units as required.
If the incoming mains water pressure is less than 2.5 bar, a MAINSBOOST Charger pump can be used in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 100CV features a nominal vessel size of 100 litres and a pressurised cold water water storage capacity of approximately 55 litres.
Each unit is supplied with the unique compact MAINSBOOST Monobloc 22/28mm Upstream Kit (USK) as standard which significantly simplifies installation.

Key Features

5 year warranty

Up to 80 litres/minute per vessel

1 x 100 litre pressure vessel

Resources & Downloads

Mainsboost Composite Vessel Data Sheet

Mainsboost Composite Vessel Installation Guide

Mainsboost Composite Dimensional

Mainsboost Site Survey Form (Off-Line PDF)

Technical Specification

Product Code	44512
General
Warranty	5 years
Conformity Certification	UKCA, CE
System patent no.	2349908
Pressure vessel nominal size	100 litres
Pressure vessel quantity	1
Features
Pressure vessel usable capacity**	55 litres
Mounting	Floor
Upstream line-in kit	22 mm
Performance
Maximum working pressure*	860 kPa (8.6 bar)
Min / Max operating temperature	Min 4 °C / Max 35 °C
Max rated temperature	90 °C
Typical noise	Silent
Materials
Pressure vessel	Continuous strand fibreglass and epoxy resin
Membrane	Butyl rubber
Connections
Connection - inlet	22 mm
Connection - outlet	22 mm
Physical
Width	421 mm
Depth	449 mm
Height	980 mm
Weight - including fittings	11.2 Kg
Weight - filled	66.2 Kg
Weight - maximum	111.2 Kg
GTIN 13 DIGIT	5050400445128
*	The maximum pressure that can be applied to the cylinder under any installation conditions.
**	At typical working pressure.

Accessories

MAINSBOOST MB 100C Add-on Unit

Mainsboost MB 100C JKT

Mainsboost Charger Wall Mount MBC 12-22 WM

MAINSBOOST