Mainsboost MB 100SV-1-22 | Water Flow Booster

MAINSBOOST

MAINSBOOST MB 100SV

Find a Local Stockist

Find an Online Stockist

Mains Water Boosting System

The MAINSBOOST MB 100SV-1 is designed for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on units as required.
If the incoming mains water pressure is less than 2.5 bar, a MAINSBOOST Charger pump can be used in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 100SV-1 features a nominal vessel size of 100 litres and a pressurised cold water water storage capacity of approximately 55 litres.
Each unit is supplied with the unique compact MAINSBOOST Monobloc 22/28mm Upstream Kit (USK) as standard which significantly simplifies installation.

Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all MAINSBOOST vessels are supplied with a 5 year warranty.

Key Features

Up to 80 litres/minute per vessel

1 x 100 litre pressure vessel

Minimal maintenance

Resources & Downloads

Mainsboost Steel Vessel Data Sheet

Mainsboost Steel Vessel Installation Guide

Mainsboost Steel Vessel Vertical Dimension Schematic

Mainsboost Site Survey Form (Off-Line PDF)

Technical Specification

Product Code	44452
General
GTIN 13	5050400444527
Warranty	5 years
Conformity Certification	UKCA \| CE
Features
Pressure vessel nominal size	100 litres
Pressure vessel usable capacity**	55 litres
Mounting	Floor
Upstream line-in kit	22 mm
Performance
Maximum working pressure*	1000 kPa (10 bar)
Min / Max operating temperature	Min 4 °C / Max 35 °C
Max rated temperature	90 °C
Typical noise	Silent
Materials
Pressure vessel	Epoxy coated mild steel
Membrane	Butyl rubber
Connections
Connection - inlet	22 mm
Connection - outlet	22 mm
Physical
Width	410 mm
Depth	410 mm
Height	890 mm
Weight - including fittings	19.7 Kg
Weight - filled	74.7 Kg
Weight - maximum	119.7 Kg
*	The maximum pressure that can be applied to the cylinder under any installation conditions.
**	At typical working pressure.