Mainsboost MB 250SV-1-22 | Mains Water Booster

MAINSBOOST

MAINSBOOST MB 250SV

Find a Local Stockist

Find an Online Stockist

Mains Water Boosting System

The MAINSBOOST MB 250SV-1 is designed for 'direct on mains' systems (unvented hot water cylinders and combination boilers) where the incoming mains pressure is greater than 2.5 bar but the flow is insufficient to meet demand.
MAINSBOOST vessel systems do not require an electrical supply and operate silently.

System cold water storage capacity can be expanded simply by adding one or more MAINSBOOST Add-on units as required.
If the incoming mains water pressure is less than 2.5 bar, a MAINSBOOST Charger pump can be used in conjunction with the MAINSBOOST vessel system to boost pressure.

The MAINSBOOST MB 250SV-1 features a nominal vessel size of 250 litres and a pressurised cold water water storage capacity of approximately 137 litres.
Each unit is supplied with the unique compact MAINSBOOST Monobloc 22/28mm Upstream Kit (USK) as standard which significantly simplifies installation.

Constructed from an epoxy coated steel body and a highly durable virgin butyl diaphragm, all MAINSBOOST vessels are supplied with a 5 year warranty.

Key Features

5 year warranty

Up to 80 litres/minute per vessel

1 x 250 litre pressure vessel

Resources & Downloads

RESIDENTIAL PRODUCT BROCHURE - FLIPBOOK

RESIDENTIAL PRODUCT BROCHURE - PDF

MAINSBOOST MBS DATA SHEET

Mainsboost Steel Vessel Installation Guide

Mainsboost Steel Vessel Vertical Dimension Schematic

Mainsboost Site Survey Form (Off-Line PDF)

Technical Specification

Product Code	44461
GENERAL
GTIN	5050400444619
Warranty	5 years
Conformity certification	UKCA \| CE
FEATURES
Pressure vessel nominal size	250 litres
Pressure vessel quantity	1
Pressure vessel usable capacity**	137.5 litres
Upstream kit	Monobloc 22/28 mm
Mounting	Floor
PERFORMANCE
Maximum working pressure*	1000 kPa (10 bar)
Min / Max operating temperature	Min 4 °C / Max 35 °C
Max rated temperature	90 °C
Typical noise	Silent
CONSTRUCTION
Pressure vessel	Epoxy coated mild steel
Membrane	Butyl rubber
CONNECTIONS
Connection - inlet	22 mm
Connection - outlet	22 mm
DIMENSIONS
Width	535 mm
Depth	535 mm
Height	1210 mm
Weight - including fittings	40.7 Kg
Weight - filled	178.2 Kg
Weight - maximum***	290.7 Kg
*	The maximum pressure that can be applied to the cylinder under any installation conditions.
**	At typical working pressure.
***	The maximum weight of the vessel under fault conditions