Showermate TP S2.0 bar Single

SHOWERMATE

Find a Local Stockist

Find an Online Stockist

Standard Single

SHOWERMATE TP Standard 2.0 bar Single Shower Pump. Designed to boost the hot or cold water supplies to single taps or pump blended water from a shower mixer.

Suitable for positive head applications only where the existing flow due to gravity is more than 1 litre/min.

Applications

Boosting hot or cold water supplies to a single tap or the blended water between a shower valve and shower head in low pressure gravity systems
Suitable for use where there is already more than 1 litre/min flow from the outlet(s) to be boosted

Key Features

2.0 bar pressure

Suitable for positive head applications

High quality entry level plastic pump supplied with 15 mm flexible hoses

Resources & Downloads

RESIDENTIAL PRODUCT BROCHURE - FLIPBOOK

RESIDENTIAL PRODUCT BROCHURE - PDF

Showermate TP Single Data Sheet

SHOWERMATE TP STANDARD INSTALLATION GUIDE

Technical Specification

Product Code	49086
General
GTIN	5050400490869
Warranty	1 year
WRAS	WRAS Approved Product (1506334)
Conformity Certification	UKCA, CE
Features
Pump type	Centrifugal
Pump control	Flow Switch
Anti-vibration feet
Inlet strainer(s)
Flexible hoses	2
Dry run protection
Typical noise	56 dB(A)
Materials
Pump body	Plastic
Impeller	Plastic
Mechanical seal	EPDM / Carbon / Al.Oxide
Performance
Maximum head - closed valve	2.0 bar / 20 metres
Performance @ 9 l/min	1.0 bar
Performance @ 18 l/min	0 bar
Maximum flow	17 l/min
Maximum static inlet pressure	10 metres
Maximum working pressure*	300 kPa / 3.0 bar
Maximum ambient air temperature	40 °C
Min / Max water temperature**	Min 4 °C / Max 65 °C
Flow switch sensitivity	0.8 l/min (approx)
Connections
Pump connections (Inlet)	G ¾ M
Pump connections (Outlet)	G ¾ M
Flexible hoses
Connections (Inlet)	G ¾ female x 15 mm push-in x 185 mm long
Connections (Outlet)	G ¾ female x 15 mm push-in x 175 mm long
Motor
Type	Series wound, manual reset thermal trip
Duty rating	Intermittent S3 (30 mins on / 30 mins off @ 9 l/min)
Electrical
Power supply (Vac/Ph/Hz)	230 V a.c. / 1 / 50 Hz
Power consumption - P1	180 Watts
Current - full load	1 Amp
Fuse rating	3 Amps
Power cable length	1.5 metres (pre-wired)
Physical
Enclosure protection	IPX2
Length	228 mm
Width	97 mm
Height - excluding hoses	152 mm
Weight - including fittings	2.2 Kg
*	The maximum pressure that can be applied to the pump under any installation conditions.
**	A stored water temperature of 60 ^oC is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.

Accessories

Anti-Vibration Pump Mounting Pad

Hot Water Cylinder Flange - Top Entry

SHOWERMATE