Aquaboost SP3V 3HM04S VARiFLO 24

AQUABOOST

AQUABOOST SP3V 3HM04S VARiFLO 24

Booster Set - Horizontal Triple

As a result of a redefined product range under the formation of the Fluid Water Group, this product has been discontinued. Its direct replacement going forward is the Flowtech Flowboost AH available through Flowtech. Click here to view the product.

The AQUABOOST SP3V-3HM04S-VARiFLO-24 booster set utlises WRAS approved components* and features three stainless steel multistage pumps mounted on a galvanised steel base plate. The pumps are operated by our advanced variable speed controller and will deliver a nominal flow rate of 3 m³/h (Per Pump) and nominal head pressure of up to 2 bar.*WRAS & KIWA Regulation 4 approval pending

Applications

Cold water pressure and flow boosting in a range of domestic, commercial and industrial applications.

Key Features

Flow rates up to 4.4 m³/h (per pump)

Head pressure up to 2.8 Bar

Variable speed pump control

Resources & Downloads

Aquaboost Brochure - PDF

AQUABOOST VARiFLO BROCHURE - FLIPBOOK

AQUABOOST VARiFLO INSTALLATION GUIDE

AQUABOOST SP3V 3HM04S VARIFLO 24 DATA SHEET

Technical Specification

Product Code	62035
General
Warranty	2 Years
WRAS approval	Pending
Conformity certification	UKCA / CE
Features
Dry run protection
Glycerine filled pressure gauge
Pump check valve(s)
BMS volt-free contacts
Performance
Nominal head	2 bar
Maximum head (closed valve)	2.8 bar
Nominal flow rate	3 m³/h (per pump)
Maximum flow rate	4.4 m³/h (per pump)
Minimum static inlet pressure	1 metre
Maximum static inlet pressure	10 metres
Maximum ambient air temperature	Max 40 °C
Water temperature range	Min 4 °C / Max 23 °C
Maximum working pressure (kPa / bar)	1000 kPa / 10 bar
Connections
Inlet	2” BSP
Outlet	2” BSP
Manifold
Manifold construction	Stainless steel
Pump isolation valves	Full bore, lever
Pump
Number of pumps	3
Pump type	Multistage centrifugal (horizontal)
Pump body	Stainless steel
Impeller	Stainless steel
Mechanical seal	EPDM / Silicon Carbide / Carbon
Motor type	Induction (current overload sensor)
Duty rating	Continuous (S1)
Electrical
Power supply / phase / frequency	230 V / 1 / 50Hz
Power consumption	0.3 kW (per pump)
Current - full load	2.5 Amps (per pump)
Physical
Enclosure protection	IP55
Width	900 mm
Depth	506 mm
Height	1000 mm
Weight	59 kg

Compare Models

Description	Maximum head (closed valve)	Maximum flow rate
AQUABOOST SP3V 3HM04S VARiFLO 24	62035	2.8 bar	4.4 m³/h (per pump)
AQUABOOST SP3V 3HM06S VARiFLO 24	62036	2.8 bar	4.4 m³/h (per pump)
AQUABOOST SP3V 3HM08S VARiFLO 24	62037	6 bar	4.4 m³/h (per pump)
AQUABOOST SP3V 3HM10S VARiFLO 24	62038	7.6 bar	4.4 m³/h (per pump)
AQUABOOST SP3V 3HM12S VARiFLO 24	62039	9.1 bar	4.4 m³/h (per pump)
AQUABOOST SP3V 5HM04S VARiFLO 24	62040	3 bar	8.5 m³/h (per pump)
AQUABOOST SP3V 5HM06S VARiFLO 24	62041	4.6 bar	8.5 m³/h (per pump
AQUABOOST SP3V 5HM08S VARiFLO 24	62042	6 bar	8.5 m³/h (per pump)
AQUABOOST SP3V 5HM10S VARiFLO 24	62043	7.5 bar	8.5 m³/h (per pump)
AQUABOOST SP3V 5HM12S VARiFLO 24	62044	9.1 bar	8.5 m³/h (per pump)
AQUABOOST SP3V 10HM03S VARiFLO 24	62045	3.6 bar	14 m³/h (per pump)
AQUABOOST SP3V 10HM04S VARiFLO 24	62046	4.8 bar	14 m³/h (per pump)
AQUABOOST SP3V 10HM06S VARiFLO 24	62047	7.2 bar	14 m³/h (per pump)
AQUABOOST SP3V 15HM03S VARiFLO 24	62048	4.3 bar	24 m³/h (per pump)

AQUABOOST