Mainsboost Flomate MBF 12

Mainsboost

Find a Local Stockist

Find an Online Stockist

Mains Boost Pump

Suitable for low occupancy properties with typically one bathroom.
The Mainsboost Flomate MBF 12 Pump is designed to be connected directly to the incoming mains and will deliver an additional 1.5 bar pressure to the existing mains pressure and a maximum flow rate of 12 litres per minute.
The pump will start automatically when a flow rate of 0.6 litres per minute or more exists.

Key Features

3 year warranty

Maximum output flow rate 12 litres/minute

Increases mains water pressure by 1.5 bar

Resources & Downloads

Mainsboost Brochure UK

Mainsboost Flomate MBF 12 Data Sheet

Mainsboost Flomate MBF 12 Performance Curve

Mainsboost Flomate MBF 12 Installation Guide

Mainsboost Flomate MBF 12 Dimensional

Mainsboost Site Survey Form (Off-Line PDF)

Technical Specification

Product Code	46574
General
Warranty	3 years
WRAS approval	1711704
Approvals	WRAS, CE
Features
Pump type	Peripheral
Mounting	Floor
Anti-vibration feet
Dry run protection
Typical noise	48 dB(A)
Materials
Pump body	Brass
Impeller	Brass
Mechanical seal	EPDM / PTFE / Al. Oxide
Performance
Maximum head - closed valve	3.2 bar (32 metres)
Maximum flow	12 l/min
Maximum working pressure*	600 kPa (6 bar)
Maximum ambient air temperature	40 ^oC
Min / Max water temperature	Min 4 ^oC / Max 23 ^oC
Flow switch sensitivity	0.6 l/min (approx)
Connections
Pump connections	G ¾ male
Motor
Type	Induction (auto-reset thermal trip)
Duty rating	Continuous (S1)
Electrical
Power supply (Vac/Ph/Hz)	230 V a.c. / 1 / 50 Hz
Power consumption - P1	340 Watts
Current - full load	1.5 Amps
Fuse rating (Amps)	5 Amps
Power cable length	1.5 metres (pre-wired)
Physical
Enclosure protection	IPX4
Length	210 mm
Width	130 mm
Height - excluding hoses	231 mm
Weight - including fittings	5.2 Kg
GTIN 13 DIGIT	5050400465744
*	The maximum pressure that can be applied to the system under any installation conditions.

Mainsboost